High speed, high production machining centers that can make light work out of the most demanding of production schedules.
These machines have been designed to encompass a minimum footprint yet they have some of the most rugged and over-engineered features on today's market.
The heavy duty spindle and headstock have the ability to absorb some very high cutting forces yet they belie this machine's best features with very high rapid feedrates and a constant 2.5 second tool change are standard features on these production machines.
Standard features:
- Rapid feedrates of 30/30/24 m/min
- Tool changes of 2.5 seconds
- 8000 rpm spindle with rigid tapping
- Bellows type guarding on Z axis
- Large work table for 4th axis applications
- 3 axis linear guides.
- Ram & Arm type ATC
- Rapid tool change is facilitated through the use of twin arm independent tool magazine with bidirectional random selection.
- The cam driven ATC offers optimal reliability and excellent service life.
- Side mounting of tool magazine ensures tools are kipt out of machining area and free of swarf.
- Superior casting design
- Advanced Finite Element Analysis technique is used to develop the rib structure to meet strict requirement for fast feed rate.
- Machine bed and column are made of nodular gray iron providing optimal damping properties while all castings are carried out following Meehanite process.
- Optional APC (Auto Pallet Changer)
- To eliminate idle time due to workpiece loading and unloading, double pallet APC is available.
- Rotary type APC front mounted on the machine offers quick change-over time 3 seconds (pallet to pallet) or 7 seconds (chip to chip) only.
- Direct mounted to machine for easy installation and reduced floor space.
- Victor NC Package
- FANUC 0i-M / 21i-M / 18M-C / 18i-M controllers to meet various requirement for batch production or high speed machining.
- Heidenhain TNC-410/iTNC-530 controllers with user-friendly conversational function to meet mold manufacturing requirement.
- Maximum spindle heavy duty spindle
- A cartridge type spindle is used offering greater flexibility with a range of spindle configuration. Unlike our competitors, maximum support is offered around the spindle cartridge with a headstock casting that extends down as far as the spindle nose so that the bearing load areas are supported by the headstock as well as the cartridge.
- This heavy casting ensures any residual vibration is absorbed by the headstock traher than tooling only.
- Air curtain is included as standard to prevent the swarf getting into the spindle.
- Optional spindle oil cooler ca be easily installed to offer constantly circulating cooling oil around the spindle cartridege.
- Direct coupled servo-motors
- Coolant flush onto bottom guarding
- High pressure coolant flushing away the swarf from the bottom guarding assures optimal chip disposal efficiency during machining.
- "
" type telescopic cover to avoid the swarf accumulation. - Front mounted Y-axis motor
To eliminate motor backlash all servo motors are direct coupled to the ballscrews while flexible couplings eliminate any noise due to minor misalignments encountered with other transmission systems.
The Y axis servo motor is front mounted to reduce the overall length of the ballscrew thus reducing the thermal displacement and increasing structure rigidity.
Machine Layout and Specification(Metric) Machine Layout and Specification(Imperial)
THE VICTOR-TAICHUNG COMPANIES
was marked under the brandnames 
(outside North America) and 