Designed by following extensive research and feedback from numerous machine tool users, Victor's new Vcenter-205 has been designed with a long fixed table to provide multi-tasking machining precision with 30m /min rapid traverse in all axes. The traveling column enables pendulum loading and machining in cycle to reduce load/unload times and to maximize spindle utilization.
- Directly-coupled Spindle (DCS) with high torque spindle motor
- Spindle motor is directly coupled to the spindle to avoid the vibration resulted from belts and enhance surface finish on components.
- 12000rpm spindle speed with dual winding for high torque output accommodates both heavy cutting at low rpm and high speed machining.
- Oil-air lubrication with filtration system is used for spindle bearing.
- Air curtain has been added to constantly give the spindle and extra coat of protection.
- Column-mounted tool magazine and arm type ATC
- Tool magazine moving with column reduces the tool exchange time and ensures tools and kept out of machining area and free of swarf.
- Two arm type ATC offers quick tool changeover time and optimal reliability.
- BT-40 tooling with updated pull stud JIS-40P upgrades the cutting capability than conventional BT-40 tooling.
- Traveling Column with 30 m /min rapid feed
- C-framed traveling column features easy access to load/unload the components.
- Rapid feed rate 30/30/ 30 m /min for 3 axes with scissor type telescopic guarding reduces spindle idle time with reliable quality guaranteed.
- Less interference between tool magazine and working area by moving the column backward.
- High damping guide ways with high stiffness
- Ballscrew holders are cast into the machine for even more rigidity and strength. This ensures a constant support for the ballscrews over the entire machine life.
- Large diameter ( O 40 mm ) ball screws and big size linear guides (width 45 mm ) with retainer (model SHS) ensure the high structure stiffness during machining.
- Direct coupled servo motors eliminate motor backlash and noise caused by misalignment.
- Long Fixed Table
- Fixed worktable assures the evenly distributed loading and features for uniform accuracy at full stroke of X-axis travel even when oversized parts of off-center parts are loaded.
- Easy installation for the 4 th axis rotary tables or hydraulic fixtures which cannot be activated for conventional VMC with 2 pallet APC (Auto Pallet Changer).
- High rigidity dynamic structure
- Heavy-duty Meehanite© castings from Victor's licensed Meehanite foundry are used in the bed and column for maximum damping and strength.
- One piece bed castings with a heavily ribbed column minimizes machine distortion.
- CAE (computer aided engineering) design results in a maximum stiffness to ensure the minimum overhang distortion for all Y-axis traveling range 550 mm .
Machine Layout and Specification(Metric) Machine Layout and Specification(Imperial)
THE VICTOR-TAICHUNG COMPANIES
was marked under the brandnames 
(outside North America) and 